Texas Instruments CC3235MODx SimpleLink Wireless MCU Module
Texas Instruments CC3235MODx SimpleLink Dual-Band Wireless MCU Module is a fully programmable FCC, ISED/IC, ETSI/CE, and MIC Certified wireless microcontroller (MCU) module with built-in dual-band Wi-Fi connectivity. The modules integrate the 40MHz crystal, 32.768kHz RTC clock, 32Mb SPI serial Flash, RF filters, diplexer, and passive components. The SimpleLink™ CC3235MODx module family comes in two different module variants (CC3235MOS and CC3235MODSF). The CC3235MODS includes 256KB of RAM, IoT networking security, and device identity/keys. The device also has MCU level security features such as file system encryption, user IP (MCU image) encryption, secure boot and debug security. The CC3235MODSF builds on the CC3235MODS and integrates a user-dedicated 1MB of executable flash in addition to the 256KB of RAM.
Features
Fully integrated and green/RoHS modules includes all required clocks, SPI Flash, and passives802.11 a/b/g/n: 2.4GHz and 5GHzFCC, IC/ISED, ETSI/CE, and MIC CertifiedFIPS 140-2 Level 1 Validated IC InsideMultilayered security features, help developers protect identities, data, and software IPLow-power modes for battery powered applicationCoexistence with 2.4GHz radiosIndustrial temperature: –40°C to +85°CCC3235MODx multiple-core architecture, system-on-chip (SoC)1.27mm pitch QFM package for easy assembly and low-cost PCB designTransferrable Wi-Fi Alliance® CertificationApplication microcontroller subsystemArm® Cortex®-M4 core at 80MHzUser-dedicated memory256KB RAMOptional 1MB executable FlashRich set of peripherals and timersMcASP Supports Two I2S ChannelsSD, SPI, I2C, UART8-Bit Synchronous Imager Interface4-Channel 12-Bit ADCs4 General-Purpose Timers (GPT) with 16-Bit PWM ModeWatchdog TimerUp to 27 GPIO PinsDebug Interfaces: JTAG, cJTAG, SWDWi-Fi network processor subsystemWi-Fi® core802.11 a/b/g/n 2.4GHz and 5GHzModesAccess Point (AP)Station (STA)Wi-Fi Direct® (only supported on 2.4GHz)SecurityWEPWPA™/WPA2™ PSKWPA2 EnterpriseInternet and application protocolsHTTPs server, mDNS, DNS-SD, DHCPIPv4 and IPv6 TCP/IP stack16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)Built-in power management subsystemConfigurable low-power profiles (always on, intermittently connected, tag)Advanced low-power modesIntegrated DC/DC regulators
Applications
For Internet of Things applications, such asMedical and HealthcareMultiparameter Patient MonitorElectrocardiogram (ECG)Electronic Hospital Bed & Bed ControlTelehealth SystemsBuilding and Home AutomationHVAC Systems & ThermostatVideo Surveillance, Video Doorbells, and Low-Power CameraBuilding Security Systems and E-locksAppliancesAsset TrackingFactory AutomationGrid Infrastructure
Texas instruments Newest
Texas Instruments LM5155EVM-FLY Controller Evaluation Module (EVM) showcases the features and performance of the LM5155 as a wide input non-synchronous flyback controller.
Date: 2019-09-26Texas Instruments TPS560430QEVM Converter Evaluation Module (EVM) is a fully assembled and tested circuit for evaluating the TPS560430-Q1 series step-down converters.
Date: 2019-09-26Texas Instruments TPS62840-1xxxEVM5x Converter Evaluation Modules (EVMs) facilitates the evaluation of the TPS6284x family of 750mA, step-down converters with 60nA IQ.
Date: 2019-09-25Texas Instruments TPS6284x High-Efficiency Step-Down Converters come with ultra-low operating quiescent current of typically 60nA.
Date: 2019-09-25Texas Instruments TPS92682EVM-070 Evaluation Module (EVM) features a two-channel, constant current boost, and boost-to-battery regulator based on the TPS92682 dual-channel controller with SPI interface device.
Date: 2019-09-25Texas Instruments TPS92682EVM-069 Evaluation Module (EVM) features a two-phase, constant voltage boost regulator based on the TPS92682 dual-channel controller with SPI interface.
Date: 2019-09-25Texas Instruments TPS92682-Q1 Dual-Channel Peak Current-Mode Controller is programmable to operate in constant-voltage (CV) or constant-current (CC) modes.
Date: 2019-09-25Texas Instruments PGA460PSM-EVM Proximity-Sensing Evaluation Module (EVM) is a small-form-factor solution showcasing double-sided printed circuit board (PCB) spacing and the supporting component requirements for the PGA460.
Date: 2019-09-24
选择你的位置