Omron Industrial Automation K6CM Motor Condition Monitoring Devices
Omron K6CM Motor Condition Monitoring Devices quantifies the status of a three-phase induction motor and pump with current analysis, vibration/temperature, and insulation resistance versions of monitoring. These monitoring devices include alarm bar, LCD display, and unit switching for the measured value displayed. The alarm bar settings can be made according to the device used with a threshold reference. The K6CM motor condition can be displayed on an alarm bar in three colors like green (normal), yellow (warning), and red (critical). The motor condition depends on the threshold value settings for an alarm output. These K6CM devices are equipped with a transistor that externally outputs the status of the motor and error states of the monitoring device main unit.
Features
Numeric LCD displayAlarm bar with alarm output settingsEquipped with a transistor outputClamp-type CT/ZCT that supports easy post-installationTrigger function enables measurement at the required timingErrors of the K6CM device itself and when to be replaced can also be detectedPush-in plus terminal technology reduces wiring workK6CM device can also be monitored by PLCs with the built-in EtherNet/IPConfirmation of the front display makes monitoring on-site easy
Specifications
45GHz to 65GHz power supply frequency range10Hz to 10KHz detection frequency rangeThree-phase induction motor output form Transistor output
Applications
Air supply and exhaust fanWater pumpsGroundwater pumpsEscalator motor
Omron electronics Newest
Omron A22NE-PD Emergency Stop Pushbutton Switches feature a Lock Detection contact that minimizes E-stop failures during emergency shutdowns.
Date: 2019-08-26Omron Electronics B5W-LB Light Convergent Reflective Sensors offer a 24VDC voltage rating, 20mA maximum current consumption, and a 10 to 55Hz vibration resistance range.
Date: 2019-08-07Omron Electronics W7ED Series Touch Sensors are available at Mouser Electronics and offer a longer lifecycle than mechanical switches and easier to design with than Touch Sensor IC's.
Date: 2019-08-02Omron Electronics G3VM-26M MOS FET Relay offers a 5VDC rated input voltage, a 15mA input current, and a 500MΩ insulation resistance.
Date: 2019-07-25Omron Automation G6D/G3DZ Push-In Terminal Relay offers a 12 or 24VDC operation coil rating, a 5A carry current, and a 100mΩ maximum contact resistance.
Date: 2019-06-27Omron Automation S8VK-WA 3-Phase 200V Power Supply offers a 24VDC output using 170 to 264VAC input, and a 240 to 960W power rating..
Date: 2019-06-24Omron Electronics G2RL-E2 Power PCB Relays are single-pole relays for high current load switching and high ambient temperature.
Date: 2019-05-08Omron Industrial Automation E3NX-MA Smart Fiber Amplifier Units reduce installation space by half and decrease the size of the control panel.
Date: 2019-04-05
选择你的位置